Specifications:

Assembled Specs:

Length: 16 ft / 4.9 m

Beam Width: 22.5 in / 57 cm

Kayak Weight: 49 lbs / 22 kg

Payload Capacity: up to 350 lbs / 159 kg

Cockpit 16.5 x 30.5 in / 42 x 77.5 cm

Packed Specs:

Transport Size: 41 x 19 x 9 in / 104 x 48 x 22 cm

Transport Weight: 56 lbs / 25 kg

Materials & Construction:

Hull: Nylon Woven Military-Grade Polyurethane

Frame: 7000 Series Aircraft-Grade Aluminum, Colour Anodized (red/blue)

Ribs: Carbon FiberSeat &

Coaming: Urethane

Fasteners: Stainless Steel

Product Updates: 

2024-25

• B1 Rib lockpin reinforcement.
• B1 & S1 Ribs updated with arched bottoms to reduce potential for wear when impacting submerged obstacles.

2023

• Hull fabric upgrade – increased puncture resistance.
• Frame upgraded to 7001 aluminum for added strength.

2022-23

• Mechanical “spare-tire” Backup Jack developed for redundancy and peace of mind in remote areas.

2022

• Large blue rib lock pin diameter increased for strength; pull ring replaced by nylon cord for ease of use and added strength.

2021 

• Coamings – formulation change (plasticizer added) to increase toughness.

2020

• Keder handle strap end caps – design & formulation changed to reduce potential for breakage (fibre added).

2019

• Plastic end added to keder to reduce keder cord wear/damage.
• New deck cord configuration on rear deck to make it easier to open the keder.
• Neoprene seal added under keder to reduce water ingress.
• Sea-sock geometry changed to give more foot room.
• Sea-sock attachment points added.

2018-19 

• Keder cord layout adjusted to ease keder closing.
• Upgraded deck cord ends & anchor points.
• Life-line upgraded to reflective cord.
• Back-band replaced the former rigid seat back.
• Drain holes added to the seat pan.
• Optional adjustable hip pads made available.
• Optional rough water thigh braces made available.

Late 2018

• Carbon Fiber Rib upgrade: lighter, more rigid, color coded for ease of assembly, new shape gives larger “pass through” area (easier to stuff legs and gear through them).
• Aluminum Frame upgrades: redesigned fold points for more compact design, allowing for transport by air in a checked bag.
• Ball Stud Receivers: added to allow re-attachment of frame tubes to end plates.
• Color-coded frames (blue/red) for ease of assembly; colour anodizing also reducing potential for corrosion.
• Jack upgrades: more than 125 revisions to decrease weight and increase reliability/manufacturability.
• Rolling Bag upgrade: more compact & versatile.

You can also find this information in each kayak product listing, below: 

If you need more information about our kayaks, book a short call with our Chief Paddling Officer, or send us a message on WhatsApp: +1 250-797-8725 ('TRAK')